Installing An Hsim - Cabletron Systems DELHF-UA User Manual

Chapter 2: Installation
HSIM
Faceplate Screws
5. Press down firmly on the FPIM until the pins slide all the way into the
HSIM connector.
6. Secure the FPIM with the screws saved in step 2.
7. Secure the faceplate of the HSIM with the screws saved in step 3.
2.3

INSTALLING AN HSIM

Only qualified personnel should install or service this unit.
You can install an HSIM in any DIGITAL device that supports HSIM
technology (e.g., the MultiSwitch 700, DLE32-MA). Refer to the release
notes for the version of firmware running on the DIGITAL device to
ensure that the DELHF-UA is supported. The following subsections
2-4
FPIM Screws
Figure 2-2 Installing FPIMs
FPIM Connector
HSIM
FPIM Connector Pins
Standoffs
209134
DELHF-UA User's Guide