10. Secure the DELHF-UA to the module faceplate using the mounting
screws saved in step 5.
11. Secure the DELHF-UA to the module standoffs using the standoff
screws saved in step 6.
12. Reinstall the module in the chassis.
13. Reattach the network cabling to the module.
Refer to Chapter 4 for instructions on configuring the DELHF-UA using
Local Management.
HSIM
Faceplate Mounting Screws
2.3.2
Installing a DELHF-UA in a Standalone Hub
To install a DELHF-UA into a standalone hub, perform the following
steps:
DELHF-UA User's Guide
Standoff Screws
Figure 2-4 Installing the DELHF-UA
Installing an HSIM
HSIM Connector
Pins
Standoffs
225705
2-7