Table of Contents
Advertisement
Chapter 3: Local Management
Device Name: DCE32-MA
Slot Number: X
Translate all non-Novell FDDI SNAP Frames to
Translate all Ethernet Raw Frames to
Translate all Novell FDDI SNAP Frames to
Translate all Novell FDDI 802.2 Frames to
Translate all Novell FDDI MAC Frames to
Interpret 802.3 length for frames > 64 bytes
SAVE
Figure 3-15 The FDDI/Ethernet Translation Configuration Screen
3.10.1 FDDI Translation Configuration Screen Fields
The following list describes each of the FDDI Translation Configuration
screen fields:
Translate all non-Novell FDDI SNAP Frames to
This field allows the user to translate all non-Novell FDDI SNAP frames
to a specific Ethernet frame type. The Ethernet frame types that are
available are as follows:
•
Ethernet II
•
Ethernet SNAP
The default setting for the non-Novell FDDI SNAP field is Ethernet II.
3-30
FDDI/Ethernet Translation Configuration
DEFAULT
Flash Image Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
[Ethernet II]
[FDDI MAC]
[Ethernet II]
[Ethernet 802.2]
[Ethernet 802.2]
[DISABLED]
EXIT
DELHF-UA User's Guide
RETURN
22701
Advertisement
Table of Contents
