Table of Contents
Advertisement
Chapter 2: Installation
Coverplate
Faceplate Mounting
7. Refer to Figure 2-4 and place the HSIM behind the module faceplate.
8. Align the DELHF connector of the DELHF-UA into the HSIM pins on
the module.
9. Press down firmly on the back of the HSIM until the pins slide all the
way into the HSIM Connector.
Ensure that the standoffs on the interface module align with the
standoff screw holes on the HSIM.
2-6
Screws
Figure 2-3 Removing the HSIM Coverplate
Standoff Screws
209135
DELHF-UA User's Guide
Advertisement
Table of Contents
