Tpim-F3 - Cabletron Systems SmartSwitch 9000 User Manual

TPIM-F3

The TPIM-F3, as shown in Figure A-3, provides a Single-mode fiber connection
using an ST type connector. The specifications are listed in Table A-5.
Transmitter Peak Wave Length
Spectral Width
Rise Time
Fall Time
Duty Cycle
Bit Error Rate
The link distance is up to 40 kilometers (max) and 25 kilometers (typical) on
single mode fiber-optic cable as specified by ANSI SMF-PMD.
Table A-5. FPIM-05 and FPIM-07 Specifications
Parameter Typical Minimum
1300 nm
60 nm
3.0 nsec
2.5 nsec
50.1%
-10
Better than 10
TPIM-F3
Maximum
1270 nm 1330 nm
- 100 nm
2.7 nsec 5.0 nsec
2.2 nsec 5.0 nsec
49.6% 50.7%
A-5