Pc Requirements For The V-Archive Software; V-Archive Software Installation - Vidicode V-Tap ISDN BRI Quick Manual

Hide thumbs Also See for V-Tap ISDN BRI:

Table of Contents

Quick Guide for the V-Tap ISDN BRI

Windows Vista/7/8/10 , Intel Pentium >2GHz , 4GByte RAM , >100 MB free disk space.

•

In the case that no CD is supplied, you can download V-Archive from here:

www.vidicode.com/download/v-archive/

•

With a CD, place it in your computer and the software installation starts automatically.

If it does not start, locate the file 'VArchiveInstall.exe' on the CD and start it manually.

The following window appears:

•

Select your preferred language for the installation and press OK.

•

The menu will ask for an installation key, please enter:

•

Now you can proceed with the next steps of the installation and you will be asked to confirm the

locations on your hard drive where to store the software and the data files.

•

To setup V-Archive to receive data from the V-Tap, go to Options, Setup, Recording tab, and enable

V-Tap connections:

NOTE1: The PC's IP address must be entered as the "Tunnel Server Address" in the V-Tap.

NOTE2: The PC's firewall must be open for TCP port 2016. The installer will try to do this automatically.

NOTE3: The Encryption password must be the same as the "Encryption Password" in the V-Tap.

NOTE4: The V-Archive software itself does not need channel licenses to receive from the V-Tap.

v1.14

PC REQUIREMENTS FOR THE V-ARCHIVE SOFTWARE

V-TAP

3/4

Table of Contents

Do you have a question about the V-Tap ISDN BRI and is the answer not in the manual?

V-tap isdn pri