About This Guide; Who Should Use This Guide - Enterasys SecureStack C2 C2G170-24 Hardware Installation Manual

This guide provides an overview, installation and troubleshooting instructions, and
specifications for the Enterasys
For information about the Command Line Interface (CLI) set of commands used to
configure and manage the switch, refer to the Enterasys Networks
Configuration Guide.
Depending on the firmware version used in the C2G170-24 switch, some features described in this
document may not be supported. Refer to the Release Notes shipped with the switch to determine
which features are supported.

Who Should Use This Guide

This guide is intended for a network administrator responsible for installing and setting
up the stackable switch.
Note: In this guide, the following terms are used:
• Switch refers to a C2G170-24,
• XSP refers to optional small-form pluggable interface modules that plug into the front
panel port slots 25 and 26.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.

About This Guide

®
SecureStack C2G170‐24 stackable Gigabit switch.
unless otherwise noted.
Important Notice
®
SecureStack C2
SecureStack C2 Installation Guide xiii