Dram Simm Replacement Procedure; Removing The Optional Network Expansion Module - Enterasys Matrix 7H4385-49 Hardware Installation Manual

DRAM SIMM Replacement Procedure

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones
de seguridad para evitar descargas de electricidad estática.
After you have removed the safety cover as described in "Removing the Safety Cover" on
page B‐5, proceed to "Removing the Optional Network Expansion Module (NEM)".
Removing the Optional Network Expansion Module (NEM)
Refer to Figure
1. Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap
package).
Figure B-4
1 Coverplate screws (2)
2 NEM
3 DFE module front panel
B‐4 and proceed as follows:

Removing the Optional Network Expansion Module

Â
À
Á
4 Standoff
5 Main PC board
6 Main board connectors
DFE-Platinum Series Hardware Installation Guide B-7
Gaining Access to Memory Modules
Ã
Ä
Å