Advertisement
Feature
Total OSPF LSA Type
OSPF LSA Type 1 – Router Links
OSPF LSA Type 2 – Networks Links
OSPF LSA Type 3 – Summary Networks
OSPF LSA Type 4 – Summary ASBRs
OSPF LSA Type 5 – AS External Links
OSPF LSA Type 7 – NSSA External Links
OSPF LSA Type 9 – Opaque Subnet-only
OSPF LSA Type 10 – Opaque Area
OSPF LSA Type 11 – Opaque AS
OSPF ECMP paths
Static routes
RIP routes
IP Interfaces
Secondary Interfaces
VRRP Interfaces
IP Helper Address
Access Rules (inbound only)
Access Rules – Per ACL
IGMP Groups
DVMRP Routes
FIRMWARE CHANGES AND ENHANCEMENTS:
Changes and Enhancements in 5.01.06.0007
11052 Resolved an issue introduced in release 5.01.06.0006 that affected reassembly of IP fragments directed at a routed
interface or the host address of the switch.
Changes and Enhancements in 5.01.06.0006
10690 Corrected an issue where the flowcontrol pause packets were transmitted too early leading to packet loss.
10704 Corrected an issue whereby running macauth and dot1x simultaneously would cause port policies to be removed.
10809 Corrected a CLI issue where restoring a config file containing an extra space before the end of line generated errors.
10816 Corrected an issue where ―clear port lacp port" did not restore default port LACP settings.
10848 Changed the MST configuration name default string from the bridge MAC address to a more generic name ―default".
10852 Corrected a potential memory leak associated with OSPF which prevented an interface from reaching full adjacency.
10874 Corrected an issue when under certain circumstances the SNTP client stopped processing requests.
10906 Corrected an issue that could prevent policy configurations from being loaded by the switch.
10972 Corrected an issue which could result in the loss of SNMP management.
Changes and Enhancements in 5.01.05.0004
10061 Added a CLI prompt message to "set port vlan‖ informing users that setting VLAN membership for dynamic VLANs is
not supported.
10542 Corrected an issue where clients performing 802.1X authentication on ports configured for multiauth
failed to obtain DHCP IP addresses after a device reset.
08/13/2008 P/N: 9038155-52
F0615-O
Capacity
No restriction can equal 2500
No restriction can equal 2500
No restriction can equal 2500
No restriction can equal 2500
No restriction can equal 2500
No restriction can equal 2500
Not Supported
Not Supported
Not Supported
6 per interface
Subject to Change Without Notice
CUSTOMER RELEASE NOTES
2500
4
64
2500
24
31
20
100
9
256
256
Page: 6 of 41
Advertisement
