Advertisement
CUSTOMER RELEASE NOTES
Changes and Enhancements in 5.00.75
Added automatic tagged egress to the specified VLAN when a per-port VLAN-to-Policy mapping is assigned.
Corrected potential memory leak in CDP application.
Corrected an issue where VRRP may not transition to the backup router.
Added method to remove priority setting from the configuration file without requiring clearing the configuration.
Added the ability to forward IS-IS multicast packets which can use the destination MAC address of either
01:80:C2:00:00:14 or 01:80:C2:00:00:15.
Corrected issue in enhanced PWA mode that could cause a user to be incorrectly redirected to the PWA login.
Corrected issue where 802.1X authentications may not show up in the MultiAuth Authentication Table.
Corrected issue where Link Aggregation ports may not correctly report port speed.
Corrected issue where link down on a physical port may not clear all MAC addresses in the forwarding
database associated with the port.
Corrected issue that could potentially prevent Policy enforcement.
Corrected issue that could cause delay in link on MGBIC ports.
Corrected potential issue with reporting incorrect port speed and duplex when using MGBICs.
Corrected issue with reporting of ifOperStatus as Up instead of dormant on physical ports belonging to a link
aggregation group.
Corrected potential issue in ―User Plus Phone Authentication‖ where the switch could fail to restore an admin
policy to a port after the user becomes unauthenticated.
Corrected issues where host generated ARP request packets could be egressed out a port blocked by
Spanning Tree.
Corrected issue where an SNMP V3 group name created with 2 words encased in quotes would not have the
quotes saved in the show config outfile.
Corrected issue first introduced in release 5.00.69, that could prevent communication to routed interfaces on
the switch.
Corrected issue with host ARP processing that could potentially result in a reset.
Corrected an issue with the setting of authentication traps not being persistent across resets.
Corrected an issue where the ―show ip ospf database‖ command could cause the console to lock.
Corrected an issue with the Enterasys Syslog MIB which could prevent setting Syslog servers via SNMP.
Corrected an issue where internally-generated ARP requests could be forwarded out ports in a Spanning Tree
discarding state.
Corrected the output formatting of the ―show port status‖ command.
Corrected an issue with saving and restoring multi-word SNMP group names.
Corrected a display issue regarding ARP timeout values.
Corrected a formatting error in the output of the ―show logging buffer‖ command when the default output length
is changed.
Corrected an issue that could prevent communication (telnet or ping) to a routed interface.
Corrected an issue in system initialization that could incorrectly change tagged vlan egress on a port to
untagged.
Corrected an issue that could prevent web management when using an SSL connection.
Corrected a potential reset condition when processing high rates of DHCP relay requests.
Changes and Enhancements in 5.00.59
VLAN egress lists with large numbers of individual ports will now be correctly assigned when loading a saved
configuration onto a SecureStack device using Inventory Manager.
Secondary IP addresses on routed interfaces can be configured as VRID IP address owners when
implementing VRRP on the SecureStack C2 or C3.
Modified the VRRP functionality of the SecureStack C2 and C3 to allow multiple virtual IPs to be configured on
one VRID.
08/13/2008 P/N: 9038155-52
Subject to Change Without Notice
Page: 14 of 41
F0615-O
Advertisement
