Advertisement
C3(su)->show port mirroring
Port Mirroring
==============
Source Port
Target Port
Frames Mirrored = Rx and Tx
Port Mirroring status disabled
4.
When you are ready to enable this instance, enter MIB option 1 (active) and perform an SNMP Set
operation.
5. (Optional) Use the CLI to verify the port mirroring instance has been enabled.
To delete a port mirroring instance:
1. Select a previously created port mirroring instance in your MIB browser.
2. Enter MIB option 6 (destroy) and perform an SNMP Set operation.
3. (Optional) Use the CLI to verify the port mirroring instance has been deleted as shown in the following
example:
C3(su)->show port mirroring
No Port Mirrors configured.
08/13/2008 P/N: 9038155-52
F0615-O
= ge.1.3
= ge.1.2
Subject to Change Without Notice
CUSTOMER RELEASE NOTES
Page: 41 of 41
Advertisement
