Io Status Indicators - Advantech WISE-750 User Manual

Analog Input Pin Assignment (4-pin connector)

3.2.1

IO Status Indicators

Module Status
PWR - Indicates the power if the module is connected to 10~30VDC power supply
ERR - Indicates if the status is abnormal
RUN - Indicates if the program is running
Off
PWR Power OFF
ERR Normal
RUN Program Not Ready Program Ready
Channel Status
Each of the analog input channel has a corresponded LED indicator. The LED lights
up when the channel alarm happens.
Off
CHx Channel OK
Figure 3.2 Pin assignment of 4-pin connector
LED Status
On
Power ON
- Abnormal Session Stoppage (Need
to reboot the module)
- IP address conflicting (This would
automatically resume when the con-
flict is resolved)
11
Blinking
--
--
-Booting up to main
program
- Updating firmware
LED Status
On
Channel Alarm
WISE-750 User Manual