Table 37. Debug Header - Intel Atom N2800 User Manual

Embedded Intel® Atom™ Processor N2800 with Intel® NM10 Express Chipset Development Kit User's Manual
3.2.3.6
During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O
port 80h. If the POST fails, execution stops and the last POST code generated is left at
port 80h. This code is useful for determining the point where an error occurred.
Displaying the POST codes requires a POST card that can interface with the Debug
header. The POST card can decode the port and display the contents on a medium
such as a seven-segment display.

Table 37. Debug Header

Pin Signal Name
1 VCC3
2 VCC3
3 PLTRST#
4 LPC_CLK
5 LAD0/FWH0
6 LAD1/FWH1
7 LAD2/FWH2
8 LAD3/FWH3
9 LFRAME/FWH4#
10 GND
11 GND
Debug Header
69