Trouble Shooting - Vetta VL110A Manual

TROUBLE SHOOTING

ENG
●
Current speed-reading is erratic or does not appear.
Check the alignment of the spoke magnet and sensor, and the distance between the two components. Realign the magnet
and sensor with the spacer. Check to be sure RT and TT are activated.
●
Current speed-reading is erratic or does not appear. (VL110A HD)
Inspect the wiring for any breaks or kinks. Replace the mounting bracket and sensor as needed.
●
Incorrect data appears on screen during operation.
Accuracy of the Setup data may be a problem (wheel circumference setting, bike #, etc.). Review data in System Check
mode and revise as needed.
●
Altimeter reading is "Wrong".
Altimeter needs to be re-calibrated. See the section of PRE-RIDE ALTIMETER CALIBRATION on how to recalibrate the
Altimeter through elevation or barometric pressure settings. IMPORTANT: The Altimeter must be re-calibrated before
every ride.
●
Data display is extremely slow.
Computer LCD does not operate well in extremely low temperatures. Operating range is: 0°C to 49°C or 32°F to 120°F.
Return computer to warmer climate.
●
Screen is dark and display characters look "strange".
Computer screens are adversely affected if left in direct sunlight for extended periods of time. Move the computer into the
shade until the screen recovers. No effect on data.
38