Reset; Ride Data Reset; Stopwatch & Intermediate Distance Reset; Stopwatch & Intermediate Altitude Reset - Vetta VL110A Manual

RESET

RIDE DATA RESET

1. Clear the current ride data (DST, RT, TT, AVG & MAX SPD, AVG & MAX CAD*, MAX & MIN TMP, STP, ID) to Zero.
(*T2X model only)
2. Press for 2 seconds in any Primary Screen Mode except STP/ID or STP/IA , with the RT/TT timers turned off.
3
STOPWATCH AND INTERMEDIATE DISTANCE RESET
1. Press in STP/ID Mode to stop the Stopwatch.
3
2. Press again for 2 seconds to reset the Stopwatch and Intermediate Distance to zero.
3
STOPWATCH AND INTERMEDIATE ALTITUDE RESET
1. Press in STP/IA Mode to stop the Stopwatch.
3
2. Press again for 2 seconds to reset the Stopwatch and Intermediate Altitude to zero.
3

ALL CLEAR TOTAL RESET

1. Clear all settings entered in the Initial Setup or NOM Setup
2. Clear the current ride data to Zero from the screen.
3. Press & hold , &
1 2 3
Important
1. When the computer is cleared, the master screen will appear and show all LCD segments for 3 seconds.
2. The computer will then automatically enter Initial Setup Mode to be reprogrammed.
for 2 seconds in any mode, then release the buttons.
ENG
37