Table of Contents
Advertisement
UPPER/ LOWER DISPLAYS
RT
TT
HOW TO START THE TIMERS?
●
If the timers have been reset to "0:00:00", they will start automatically when the wheel rotates. (see
HOW TO RESET THE TIMERS TO "0:00:00" below)
●
If RT/TT timers had been stopped manually, and both of the RT/TT timers were not reset to zero,
they must be restarted manually by pressing
Important
TT timer must be active in order for the RT timer to accumulate Ride Time and for
computer to calculate current ride.
HOW TO STOP?
●
When the wheels stop, RT timer will pause, but TT timer will keep running to record the total
elapsed trip time.
●
OR stop both of the RT/TT timers manually by pressing
HOW TO RESET THE TIMERS TO "0:00:00"?
●
Press
for 2 seconds in any Primary Screen Mode except STP/ID or STP/IA, with the RT/TT timers
3
turned off.
Tip:
If the bike is in motion and Button
the ride timers reset to 0:00:00. When Button
wheel input. This is a good way to begin timing a race or training ride with a rolling start.
DEFINITIONS
ACTUAL RIDE TIME IN THE TRIP
TOTAL ELAPSED TRIP TIME
FORM START TO FINISH
in RT/TT Mode.
3
in RT/TT screen Mode at the end of ride.
3
is held down in the RT/TT Mode with the timers deactivated,
3
is released, both RT and TT will start with the next
3
ENG
21
Advertisement
Table of Contents
