Setup: Altimeter Memory 2; Setup: Wheel Circumference - Vetta VL110A Manual

SETUP: ALTIMETER MEMORY 2

1. When the far right digit begins to fl ash, press
2. Press to select this no. and advance to next fl ashing digit
1
3. Repeat for each digit until the fi nal digit
4. Press and advance to the next Setup Mode.
1

SETUP: WHEEL CIRCUMFERENCE

1. When the far right digit begins to fl ash, press
CALCULATION)
2. Press to select this no. and advance to next fl ashing digit.
1
3. Repeat for each digit until the fi nal digit.
4. Press and advance to the next Setup Mode.
1
to scroll to the desired number
2
to scroll to the desired number. (see page 14, Section of WHEEL SIZE
2
ENG
13