Setup: Dual Bike; Setup: Altitude Units - Vetta VL110A Manual

HOW TO ENTER THE NOM SETUP MODE?
1. Make sure RT/TT timers are off (press
2. Advance to the SPD/DST Mode by using
3. Press & hold & to enter the NOM Setup Mode.
1 2
Important
Press at any time to exit NOM Setup Mode and advance to System Check.
3

SETUP: DUAL BIKE

1. Press to toggle between Bike 1 or Bike 2
2
2. Press to select and advance to the next Setup Mode.
1

SETUP: ALTITUDE UNITS

1. Press to toggle between feet or meter
2
2. Press to select and advance to the next Setup Mode.
1
in the RT/TT Mode and
3
.
2
will disappear)
ENG
11