Vetta VL110A Manual page 8

ENG
Button
1
Button
6
Button
2
Button
4 3
OPERATING MODE
Button Starts/stops RT/TT timers and Stopwatch
3
Reset RT/TT timers and other ride data to zero
Exits NOM Setup and advances to NOM System Check and
SPD/DST Mode
Button Turn on the NiteLite for 3 seconds
4
Button & (simultaneously for 2 seconds with RT/TT Timers are off) :
1 2
Hold both in the SPD/DST Mode to enter NOM Setup
Hold both in the SPD/ALT Mode to enter Pre-Ride Altimeter
Calibration Setup
For T2X model only
Button & (simultaneously for 2 seconds with RT/TT Timers are off) :
2 4
Hold both in the SPD/DST Mode to enter ID Learning Setup Mode