Vetta VL110A Manual page 11

ID LEARNING PROCEDURE
Step 1: Install the computer on the Integrated T2X Active Mount.
Step 2: After the screen display "id NEEd", press & hold the Torpedo's button for 3 seconds.The Light
Step 3: During the process, the computer will display "id LEArn" for 3 seconds.
Step 4: When done successfully, the computer will display "id donE" and gives 2 short beeps. The
FAILURE
If the computer always displays "id NEEd", please check if there are any objects emitting
electromagnetic waves (television, radio control toys, etc.). Keep the unit away from any object that
may be causing interference. Then press & hold the Torpedo' button for 3 seconds again, and follow
the Step 3 & 4 to fi nish the ID Learning Procedure.
If this cannot solve the problem, re-install the battery and start from the Step 1 (as above) again.
Important
Ring Indicator of the Torpedo will turn on for 2 seconds in red.
computer will go back to the screen last displayed.
To re-activate the ID Learning Procedure, press & hold
seconds in the SPD/DST Mode with RT/TT timers are off.
& simultaneously for 2
2 4
ENG
9