Table of Contents
Advertisement
SECONDARY MODE
1. Press & hold
CAD Secondary Screen Mode)
2.Press
LOWER SCREEN MODES
UPPER/ LOWER DISPLAYS
HOW TO OPERATE THE ALTIMETER?
1. Re-calibrate the Altimeter before every ride. (see page 24, Section of PRE-RIDE ALTIMETER
CALIBRATION )
2. Starts automatically when the computer awakes.
3. Stops automatically when the computer enter into Sleep Mode.
Important
your Altimeter before you start riding again. Otherwise the Altimeter will not function.
to read Average & Maximum Cadence (see page 31, Section of AVG CAD/MAX
1
to exit.
1
SPD
ALT
Whenever you clear ride data between riders or during a ride, you must re-calibrated
DEFINITIONS
CURRENT SPEED (km/hr or mile/hr)
CURRENT ALTITUDE (feet or meter)
ENG
23
Advertisement
Table of Contents
