Jumper Settings - Kontron ECX-BYT Quick Installation Manual

Item Designation Description
16 CN2 PS/2 Keyboard / Mouse Wafer
17 CN3 HDD Power Output Wafer
18 CN4 P80 Header
19 CN9 Audio Input / Output Pin Header
20 CN10 SIM Interface Wafer for MPCIE2
21 CN11 Right Channel 3W Audio AMP Output Wafer
22 CN12 Left Channel 3W Audio AMP Output Wafer
23 CN13 Digital Input / Output Wafer
24 DIMM1 DDR3 Memory SO-DIMM Socket
25 FAN1 DC5V FAN Wafer
26 FP1 Front Panel 1 Pin Header
27 FP2 Front Panel 2 Pin Header
28 MPCIE1 Mini-PCI Express v1.2 Socket (Full Size)
29 MSATA1 Serial ATA Port-1 mSATA Socket (Full Size)
30 SATA1 Serial ATA Port 0 Connector
31 CN15 USB2.0 Port 2 Pin Header
32 CN16 USB2.0 Port USBDN_1,2 Pin Header

Jumper Settings

 RTC Reset Selection (JP1)
Jumper Position
Description
Pin 1-2
X Enable Clear CMOS RTC content
(board does not boot with the jumper in this position)
- Normal operation (default position)
"X" = Jumper set (short) and "-" = jumper not set (open)
ECX-BYT - Quick Installation Guide - Version 1.0 //
www.kontron.com
// 3