Table of Contents

Advertisement

Maintenance

FUSES

Blade type
Normal
Cartridge type
Normal
Multi type
Normal
Midi type
Normal
9-54
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 5 fuse panels, one
located in the driver's side panel bolster,
the other in the engine compartment.
Blown
If any of your vehicle's lights,
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
If the electrical system does not work,
first check the driver's side fuse panel.
Before replacing a blown fuse, turn the
Blown
engine and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved. We
Blown
recommend that you immediately
consult an authorized HYUNDAI dealer.
NEVER replace a fuse with anything but
another fuse of the same rating.
Blown
• A higher capacity fuse could cause
• Do not install a wire or aluminum
OCK077071
OCK077071
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
WARNING
damage and possibly cause a fire.
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.
NOTICE

Advertisement

Table of Contents
loading

Table of Contents