Hyundai Staria US4 2021 Owner's Manual page 547

Driver assistance system
Smart Cruise Control display and
control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist mode on the cluster. Refer to "LCD
Display Modes" section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
Operating Operating
OUS4071074 OUS4071074
• When operating
(1) Whether there is a vehicle ahead and
the selected distance level
(2) Set speed
(3) Whether there is a vehicle ahead and
the target headway
• When temporarily canceled
(1) indicator
(2) The previous set speed is shaded
(3) Vehicle ahead and distance level are
not displayed.
7-106
Temporarily Temporarily
canceled canceled
OUS4071069 OUS4071069
Information
• The distance of the front vehicle on the
cluster is displayed according to the
actual distance between your vehicle
and the vehicle ahead.
• The target distance may vary according
to the vehicle speed and the set
distance level. If the vehicle speed is
low, even though the vehicle distance
have changed, the change of the target
vehicle distance may be small.
To temporarily accelerate
If you want to speed up temporarily
without altering the set speed while
Smart Cruise Control is operating,
depress the accelerator pedal. While the
accelerator pedal is depressed, the set
speed, distance level and target distance
will blink on the cluster.
However, if the accelerator pedal is
depressed insufficiently, the vehicle may
decelerate.
WARNING
Be careful when accelerating
temporarily, because the speed and
distance is not controlled automatically
even if there is a vehicle in front of you.
OUS4071075 OUS4071075