Siemens NXPLUS C Installation And Operating Instructions Manual page 33

Commercially available bar systems
Bar type Bar connection
Product
Solid-insulated MGC Moser Glaser
busbars
Preissinger
Ritz
Surge-proof caps
Product Type
Nexans Euromold 400DR-B
K400DR-B
M400DR-B
M400DR-B
150DR/G
K150DR/G
NKT CBC 40.5-630 M16
CBC 40.5-630 M16
CBC 40.5-630 M16
CBC 40.5-630 M16
Tyco Electronics Raychem RSTI-N66RC
RSTI-N66RC
RSTI-N66RC
RSTI-N66RC
Cable T-plug connection
Surge arresters
Surge limiters
806-9004.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • Revision 02
Type Conductor material
Duresca DE Copper
Duresca DG Copper
ISOBUS MB Copper
SIS Copper
Rated voltage
12 kV
24 kV
36 kV
38 kV
12 kV
24 kV
12 kV
24 kV
36 kV
38 kV
12 kV
24 kV
36 kV
38 kV
For 3-, 4-, 6- or 8-fold cable connection:
➭ Observe the manufacturer's specifications to the rated normal current of the cable plugs
used.
• Connection of cable T-plugs suitable for bushings with outside cone as interface type C
according to EN 50181
• Connection cross-sections up to 1200 mm
• Pluggable on cable T-plug
• Surge arresters recommended if, at the same time,
- the cable system is directly connected to the overhead line,
- the protection zone of the surge arrester at the end tower of the overhead line does not
cover the switchgear
• Pluggable on cable T-plug
• Surge limiters recommended when motors with small starting currents (<600 A) are
connected
Note
Maximum rated current
1250 A / 2500 A Outer sheath made of polyamide
(polyamide tube)
1250 A / 2500 A Outer sheath made of CrNi steel or
aluminum (metal sheath)
1250 A / 2500 A Outer sheath made of epoxy resin
(with heat-shrink tube, if required)
1250 A / 2500 A Outer sheath made of epoxy resin
(with heat-shrink tube, if required)
Size
Outside cone type "C"
Outside cone type "A"
Outside cone type "C"
Outside cone type "C"
INFORMATION
2
Description
Note
EPDM with conductive layer
Silicone with conductive layer
Silicone with conductive layer
33/266