Siemens NXPLUS C Installation And Operating Instructions Manual page 148

Installation
148/266
➭ Install all upper parts of the cable clamps (tightening torque: 5 Nm).
➭ Connect the cable shield and the earthing of the plug housing of all cables to the cable
bracket.
➭ Insert the rubber sleeves into the recess of the floor plate.
➭ Bolt the floor plate back in place.
Fig. 91: Inserting the rubber sleeves
➭ Re-install the metal cover of the lateral cable compartment.
➭ Install the side wall.
➭ Install the switchgear termination.
➭ Install the cable compartment cover (see page 184, "Removing and mounting the front
cover").
✔ The installation of the lateral cable connection has been completed.
Revision 02 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 806-9004.9
Fig. 92: Fastening the floor plate