Siemens NXPLUS C Installation And Operating Instructions Manual page 210

Operation
Indicatio VOIS+, VOIS R+
n
L1 L2 L3
A0
A1
A2
A3
A4 -
A5 -
A6 -
A7 -
A8 -
1
LED does not light up,
210/266
CAPDIS-S1+
L1 L2 L3 L1 L2
-
LED lights up
Revision 02 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 806-9004.9
CAPDIS-S2+ Description of the indication
L3 State of the
1
relay contacts
Red Green
U ≠ 0 U = 0 Operating voltage not present.
U ≠ 0 U = 0 Operating voltage present.
U ≠ 0 U = 0 • Operating voltage not present.
• Auxiliary voltage not available (only CAPDIS-S2+).
U ≠ 0 U = 0 Failure in phase L1, operating voltage at L2 and L3
(for CAPDIS-Sx+ also earth-fault indication).
U ≠ 0 U = 0 Voltage (not operating voltage) present.
U ≠ 0 U = 0 Indication: "Test" passed (lights up shortly).
U ≠ 0 U = 0 Indication: "Test" not passed (lights up shortly).
U ≠ 0 U = 0 Overvoltage present (lights up permanently).
U ≠ 0 U = 0 Indication: "ERROR" e.g. in case of missing auxiliary voltage.