Cleaning The Instrument's Exterior; Emptying The Exhaust Trap Bottle - Waters TQ Detector Operator's Manual

Cleaning the instrument's exterior

Caution:
case.
Use a soft cloth, dampened with water, to clean the outside surfaces of the
instrument.

Emptying the exhaust trap bottle

Check the exhaust trap bottle in the instrument exhaust line daily and empty
it before it is completely full.
Instrument exhaust trap bottle
From instrument
exhaust connection
(12-mm OD)
Required materials:
• Chemical-resistant, powder-free gloves
®
• snoop
Do not use abrasives or solvents to clean the instrument's
(or equivalent) leak detector liquid
To laboratory
exhaust port
(10-mm OD)
Cleaning the instrument's exterior 5-11