4.4
Jumpers and connectors
On-board connectors link to external devices such as hard disk
drives, keyboards, floppy drives, and so on. In addition, the board
has jumpers for configuring your board for specific applications.
The table below lists the function of each of the board's jumpers
and connectors. Later sections in this chapter give detailed
information on each jumper setting, and instructions for connecting
external devices to your card.
Table 4-1: Jumpers and connectors
Name
CN1
CN2
CN3
CN4
CN5
J2
J3
3 4
HMI-640S User's Manual
Function
PCI connector
CompactFlash socket
SODIMM gold finger (ISA/HDD/FDD/parallel/power)
I/O connector (LAN/VGA/RS-232/KB/mouse)
Power connector
Clear CMOS
Fan connector (reserved)