Initial Setup - Advantech HMI-640S User Manual

2.3 Initial Setup

The HMI-640S offers an easy setup feature: It takes merely 3 easy
steps for your initial setup before use. Simply take out the HMI-640S
from it's package and follow the steps below for a quick initial setup:
Step 1: Insert CompactFlash memory card (with Windows CE and/or
specific application software inside) into the appropriate bus
slot.
Step 2: Connect the power adapter cord to HMI-640S and plug the
other end of the cord into the power outlet.
Step 3: Turn the sytem power on for the first boot.
Warning!
Note:
Note:
Before installing the serial port mouse driver, you
must remove the PS/2 mouse driver from your
system.
The PS/2 mouse driver cannot be simultaneously
installed with a serial/COM port mouse driver.
It might be possible that you may see several light or
dark dots on the LCD panel while system powers up.
These minor imperfections actually originate from the
LCD panel manufacturing process and will not affect
the normal operation of your system in any way.
Chapter 2 System Setup
1 3