Cable Connections; Attaching A Cable Connector To The P630 - VeriFone P630 Installation Manual

Disconnect the power pack cord from the power outlet before connecting a power
supply. Connect and route all cables between the terminal, ECR and PC before
plugging the power pack cord into a wall outlet or surge protector.
Do not plug the power pack into an outdoor outlet or operate the terminal
WARNING
outdoors. Disconnecting power during a transaction can cause transaction data
files not yet stored in memory to be lost.
NOTE
Verifone recommends installing a power surge protector to protect against
possible damage caused by lightning strikes and electrical surges.
When the terminal has power and an application is loaded, the application starts
after the initial Verifone copyright screen and displays a unique copyright screen.
If no application is loaded, DOWNLOAD NEEDED appears on the display after
the initial Verifone copyright screen.
Cable
The P630 has several cabling scenarios, depending on what it connects to:
Connections
1
2
3
Turn off or unplug the terminal when connecting or disconnecting the device to
WARNING
avoid device memory corruption and data loss.
Refer to the controlling device instructions for any terminal-specific warnings.
Attaching a Cable The cables first have to be attached to the P630. To attach a cable to the terminal,
Connector to the
follow steps:
P630
Step 1: Release the screw.
Step 2: Slide out the cable cover.
Step 3: Attach the 28-PIN connector of the cable to the terminal.
Step 4: Slide in the cable cover.
Step 5: Fix the screw.
Connection to Another Verifone
RS-232 Connection Using an External Power
Ethernet Connection with External Power
Terminal.
Brick.
Brick.
P630 I
S
ETUP

Cable Connections

17
G
NSTALLATION UIDE