VeriFone P630 Installation Manual page 24

S
ETUP
Optional Accessories
Mounting P630 to a
Flat Surface (Without
a Mounting Plate)
NOTE
Mounting P630 with
Mounting Plate to a
Vertical Bracket
CAUTION
24
P630 I
NSTALLATION
2
Attach three M3 screws (not included in the P630 package) to the desired
surface. Make sure that they are aligned with the slots on top and at the
bottom of the mounting plate.
3
Secure the terminal with the mounting plate in place by aligning the holes to
the M3 screws and then sliding the entire assembly into place.
4
Slide the terminal down to secure it to the mounting plate. To remove the
terminal, slide the terminal up and pull it away from the mounting plate.
To mount the terminal to a flat surface:
1
Align the terminal's footers to the holes on the mounting plate.
2
Fit the footers of the terminal into the footer holes.
3
Screw the mounting plate in place.
Customized plates must have four recessed areas big enough to fit the footers of
the terminal. This ensures that there is no gap between the terminal and
mounting plate.
To mount the terminal with a mounting plate to a vertical bracket:
1
Ensure the mounting plate is attached to the terminal.
2
Align the three screw holes of the mounting plate with the vertical bracket
holes.
3
Screw the vertical bracket in place.
Mounting Considerations
Avoid having metallic objects in proximity to the contactless antenna. If you need
to mount the terminal to vertical or inclined surfaces, use a flat mounting plate.
An enclosed metal frame or mount may negatively affect CTLS performance.
G
UIDE