Cable Connections - VeriFone V210 Installation Manual

Disconnect the power pack cord from the power outlet before connecting a power
supply. Connect and route all cables between the terminal, ECR and PC before
plugging the power pack cord into a wall outlet or surge protector.
Figure 12
Do not plug the power pack into an outdoor outlet or operate the terminal
WARNING
outdoors. Disconnecting power during a transaction can cause transaction data
files not yet stored in memory to be lost.
NOTE
Verifone recommends installing a power surge protector to protect against
possible damage caused by lightning strikes and electrical surges.
When the terminal has power and an application is loaded, the application starts
after the initial Verifone copyright screen and displays a unique copyright screen.
If no application is loaded, DOWNLOAD NEEDED appears on the display after
the initial Verifone copyright screen.
Cable
You can connect the V210 to peripherals using the Full-Function Base.
Connections
Cable Connections Using the Full-Feature Base
Turn off or unplug the terminal when connecting or disconnecting the device to
WARNING
avoid device memory corruption and data loss.
Refer to the controlling device instructions for any terminal-specific warnings.
Connecting the Power Pack
D S
EVICE ETUP

Cable Connections

V210 I G
NSTALLATION UIDE
21