Console Time-Out; Creating An Alias - Cabletron Systems SmartSwitch 9A100 User Manual

Using the Console
If you don't specify parameters with the command, the console prompts you for an input value and provides a default
value displayed in parenthesis. For example, if you enter
the following appears. Here, the default of "
or you can enter a specific port number. Taking the default displays the following:
SmartSwitch # show portconfig
PortNumber(ALL)
Port Intf Sig
ID Type Type
==============================================================================
A1 private pnni10
A2 private autoConfig
A3 private autoConfig
A4 private autoConfig
B1 private autoConfig
B2 private autoConfig
B3 private autoConfig
B4(CPU) private uni31
C1 private autoConfig
C2 private autoConfig
C3 private autoConfig
C4 private autoConfig
D1 private autoConfig
D2 private autoConfig
D3 private autoConfig
D4 private autoConfig
SmartSwitch #
2p›F
When you accept the (
abridged.
2.5.2

Console Time-out

The console can be configured to exit if it does not sense a key stroke within a defined length of time. By default, the
SmartSwitch 9A100 is set to never time-out (value = 0). To activate the time-out feature, use the
command to adjust the time-out period:
SmartSwitch # set consoletimeout
Timeout(0)
Confirm (y/N)? : y
SmartSwitch #
2.5.3

Creating an Alias

Use the command to create shorter or easier-to-remember names for command lines. For example:
add alias
SmartSwitch # add alias
AliasName()
AliasedString()
SmartSwitch #
2-10 SmartSwitch 9A100 User Guide
show portconfig
" ports is presented. You can either accept the default by pressing Enter,
all
:
Trans Media Speed
Type Type (MB/s)
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c SMF (I) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c MMF (S) 155 MB
STS-3c CAT5 UTP 155 MB
STS-3c CAT5 UTP 155 MB
STS-3c CAT5 UTP 155 MB
STS-3c CAT5 UTP 155 MB
) default for
all show
: 30 <Will time-out in 30 minutes without input
: traffic
: set switchtrafficcongestion
Switch Installation and Setup
without specifying a port (as a parameter),
Oper
State
UP
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
UP
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
, the information displayed is often
set ConsoleTimeOut