ADTRAN NetVanta 1560-08-65W Quick Start Manual page 8

Table of Contents

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAN ICES-3 (A)/NMB-3(A)

■ This product is NRTL Listed to the applicable UL/CSA Standards. This product has also been evaluated to applicable international standards for CE marking and RCM

marking.

■ IEEE 802.3at PoE+

■ This product meets EU RoHS Directive. Refer to

Environment

■ Operating Temperature: 32°F to 113°F (0°C to 45°C)

■ Storage Temperature: -40°F to 158°F (-40°C to 70°C)

■ Relative Humidity: 10 to 95 percent, non-condensing

CAUTION!

This product is intended for business deployment. Care should be taken to protect cables from damage or vandalism.

The product is designed to meet the following environmental classes:

■ ETSI EN 300 019-1-1 "Classification of environmental conditions; Storage", 1.2

■ ETSI EN 300 019-1-2 "Classification of environmental conditions, Transportation", Class 2.3

■ ETSI EN 300 019-1-3 "Classification of environmental conditions, Stationary use at weather protected locations", Class 3.1

■ The device is designed to function without degradation during the exposure to all test severities per 3.1of ETSI EN 300 019-1-3.

Electrical

■ Power Supply: 100 to 240 VAC, 50-60 Hz, 2A

CAUTION!

Electrostatic Discharge (ESD) can damage electronic devices. When handling devices, wear an antistatic discharge wrist strap to prevent damage to electronic components.

Place in antistatic packing material when transporting or storing. When installing or maintaining, always place devices on an approved antistatic mat that is electrically grounded.

Documentation for ADTRAN Network Solutions products is available for

viewing and download directly from the ADTRAN Support Community

website.

Go to:

https://supportcommunity.adtran.com

ADTRAN offers training courses on our products, including customized

training and courses taught at our facilities or at customer sites.

For inquiries, go to:

http://adtran.com/training

Warranty: ADTRAN will replace or repair this product within the warranty period if it does not

meet its published specifications or fails while in service. Warranty information can be

found online at www.adtran.com/warranty.