Skoda FABIA 2000 Workshop Manual page 80

20
14 - Union nut
use wrench -MP 1-227- for removing and installing
15 - Vent valve
to remove, unclip valve at side and take out of filler neck.
before installing, unscrew cap
check ⇒ Fig. 2 in 20-1 page 2
16 - End cover
17 - 1.5 Nm
18 - Fuel filler flap unit
with rubber bowl
19 - Gravity valve
to remove, unclip valve at top and lift out of filler neck.
inspect valve for blockage:
♦ valve vertical: open
♦ valve tilted 45°: closed
20 - Vent line
between activated charcoal filter ⇒ item 21 in 20-1 page 2 and vent line ⇒ item 5 in 20-1 page 1
21 - Activated charcoal filter
22 - 10 Nm
23 - Vent line
clipped in place on fuel tank
Fig. 1: Installation position of flange of fuel deliv-
ery unit
Marking on the flange must be aligned with marking on
the fuel tank -arrows-.
Blue return-flow line -1- to connection marked -R-.
Black feed line -2- to connection marked -V-.
Note
After installing the flange of the fuel delivery unit, check
whether the feed, return-flow and vent lines are still
clipped in place on the fuel tank.
Fig. 2: Inspecting vent valve
Lever in off position: closed
Lever pushed in direction of arrow: open
Note
Unscrew cap of fuel tank before installing the vent valve.
20-1 2
page
FABIA 2000
Removing and Installing Parts of the Fuel Supply System
1.0/37; 1.4/44; 1.4/50 Engine, Mechanical Components
2
V
R
1
A20-0096
V20-1040
Edition 06.00
S00.5305.01.20