Skoda FABIA 2000 Workshop Manual page 10

10
–
Remove front exhaust pipe with catalyst ⇒ Chap. 26-
1.
–
Place drip tray below the engine (e. g. -V.A.G 1306-).
–
Loosen the drain screw on the coolant expansion bot-
tle.
–
Turn the drain plug -arrow- on the radiator to the left
and draw backwards, if necessary fit auxiliary hose
onto connection.
–
Remove engine cover -1- as follows:
♦ Release logo -2- and carefully lever off the cap -3-.
♦ Release nuts -4- (5 Nm).
♦
Pull out oil dipstick -6-.
♦ Remove engine cover -1- towards the top (do not un-
screw cap -5-).
–
Close the oil filler inlet on the cylinder head cover with
the cap fitted to the bottom of the engine cover (if not
available use other means).
–
Remove the air filter with hoses ⇒ 1.0/37; 1.4/44; 1.4/
50 engine - fuel injection; Rep. Gr. 24.
–
Remove the cable from the starter solenoid switch
⇒ Electrical System; Rep. Gr. 27.
–
Remove battery and battery tray ⇒ Electrical System;
Rep. Gr. 27.
–
Release the generator cables from the battery cover
and remove the wiring loom from the holder.
–
Unplug connector -1- from the engine control unit.
–
Separate plug connection -2-.
–
Unclip cable clip -3- -arrows-.
10-1 2
page
FABIA 2000 1.0/37; 1.4/44; 1.4/50 Engine, Mechanical Components
Removing and Installing Engine
1 2
6
4
5
1
A10-0118
3
4
S10-0138
2
3
S10-0142
Edition 02.02
S00.5305.03.20