10
–
Unbolt the pendulum support -arrows-.
Vehicles without air conditioning
–
Removing the lock carrier with radiator ⇒ Body Work;
Rep. Gr. 50.
Vehicles with air conditioning
Caution!
Do not open the refrigerant circuit of the air condi-
tioning system.
–
Remove the V-ribbed belt ⇒ Chapter 13-1.
–
Remove connector from the AC compressor.
–
Remove AC compressor with the refrigerant lines con-
nected.
–
Secure the AC compressor -1- to the lock carrier -ar-
row-.
–
Remove the lock carrier with the radiator and con-
denser ⇒ Body work; Rep. Gr. 50, swivel to the side
and position on support -2- in such a way that there is
no risk of tilting.
Note
♦
Do not buckle the refrigerant lines.
♦
Use cloths to protect the right headlight glass from
damage, removing the headlight if necessary.
Continued for all vehicles
–
Hook on lifting device -MP 9-201- as follows and raise
slightly with the workshop crane.
On the belt pulley side:
2nd hole of the vertical perforated bar in position 1
On the flywheel side:
2nd hole of the vertical perforated bar in position 5
Warning!
Use securing pins on the hooks and rig pins.
Note
♦
The rig positions on the supporting bracket marked 1
to 4 point towards the belt pulley.
♦
The holes in the vertical perforated bars are counted
from the hook.
10-1
6
page
FABIA 2000
1.0/37; 1.4/44; 1.4/50 Engine, Mechanical Components
MP 9-201
Removing and Installing Engine
2
1
2
3
4
S34-0403
1
S10-0136
8
7
6
5
S10-0134
Edition 02.02
S00.5305.03.20