Table of Contents
Advertisement
Chapter 3: 6C105 Setup
3.2.3
Rack Mounting the 6C105
The 6C105 can be mounted in a standard 19-inch equipment rack.
If the rack is not secured to the floor, it is recommended that
!
the chassis be installed in the bottom half of the rack. This
CAUTION
prevents the rack from being top heavy.
Read
!
procedure.
CAUTION
Two people may be required to lift the chassis into place.
The chassis is secured with ten screws, five on each side. Using the screws
provided with the equipment rack, secure the 6C105 to the rack, starting
with the bottom holes and working up, as shown in
Rack Mounting
Holes (5)
Rack Mounting
Screws (5)
3-4
Chapter 2
in this manual before completing the following
1
2
Figure 3-2 Rack Mounting the 6C105
3
4
5
PS1
6C405
6C105 Overview and Setup Guide
Figure
3-2.
PS2
Rack Mounting
Holes (5)
Rack Mounting
Screws (5)
Advertisement
Table of Contents
