Table of Contents
Advertisement
Slotted Screws (2)
3.5.2
Reinstalling the Fan Tray
To reinstall the fan tray, refer to
1.
Locate the ESD wrist strap shipped with the 6C105. Attach the ESD
wrist strap to your wrist and plug the cable from the ESD wrist strap
into the ESD grounding receptacle at the upper right corner of the
6C105.
2.
Hold the sides of the fan tray.
3.
Line up the rails on each side of the fan tray with the slot guides on the
chassis.
In the following step ensure that you do not force the fan tray
!
into place, as it may damage the unit.
CAUTION
6C105 Overview and Setup Guide
Removing and Reinstalling the Fan Tray
1
2
Figure 3-8 Removing the Fan Tray
Figure 3-9
3
4
5
PS1
and proceed as follows:
PS2
6C405
2016_20
3-15
Advertisement
Table of Contents
