Aritech 1X-X3E Series Operation Manual page 9

Item Control/LED
5 Preactivation button
and LEDs
6 Released LEDs
7 Extinguishing
Sounders On button
and LEDs
1X-X3E Series Operation Manual
LED colour Description
Red/Yellow Disables the extinguishing event (when pressed
with the General Disable button).
A flashing red LED indicates an extinguishing
preactivation.
A steady red LED indicates:
• An extinguishing activation if the red
Released LED is off, flashing fast, or flashing
slow
• An extinguishing released state if the red
Released LED is on steady
A flashing yellow LED indicates a fault that
prevents the panel from entering the
extinguishing activation state. A steady yellow
LED indicates that the extinguishing event is
disabled.
Red/Yellow Indicates the extinguishing agent release status.
A fast flashing red LED indicates the final 10
seconds before activating the actuator output.
A slow flashing red LED indicates that the
actuator has been activated and the control panel
is waiting confirmation of the release of the
extinguishing agent flow. Consult your system
installer to determine whether your system has
this option configured.
A steady red LED indicates that the panel entered
the extinguishing released state.
A flashing yellow LED indicates an actuator
output wiring fault. A steady yellow LED indicates
an actuator output disablement or test.
Red/Yellow Disables or tests the extinguishing sounders
(when pressed with the General Disable or
General Test button).
A slow flashing red LED indicates that the
extinguishing sounders are in extinguishing
activation state (sounding).
A steady red LED indicates that the extinguishing
sounders are in released state (sounding).
A flashing yellow LED indicates a wiring fault on
the extinguishing sounders (or, if configured,
sounder outputs in expansion modules linked to
the activation or released states). A steady yellow
LED indicates a disablement or test.
5