Aritech 1X-X3E Series Operation Manual page 10

Item Control/LED
8 Fire Sounders Delay
button and LEDs
9 Optical Panel On
LEDs
10 Door Fault/Disabled
LED
11 Networking Fault
LED
6
LED colour Description
Yellow Enables or disables a previously configured fire
sounders delay. Disables or tests the fire
sounders (when pressed with the General Disable
or General Test button).
A steady LED indicates that a delay is configured
and enabled. A flashing LED indicates that a
delay is counting down (fire sounders activate
when the configured delay elapses).
A flashing yellow LED indicates a Fire Sounders
wiring fault. A steady yellow LED indicates a Fire
Sounders disablement or test.
Red/Yellow Indicates the status of the optical warning panel
or sign outputs linked to the released state.
A red LED indicates that the optical warning panel
or sign output is activated (to indicate the
released state).
A flashing yellow LED indicates a wiring fault. A
steady yellow LED indicates a disablement or
test.
Yellow Indicates a safety door monitoring fault or
disablement. Safety door monitoring is optional.
A fast flashing LED indicates a safety door open
or closed faulty status as follows.
When the control panel is not in activation or
released state:
• In automatic mode, the control panel reports
a fault if the safety door is open and the door
fault delay expires.
• In manual mode, the control panel reports a
fault if the safety door is closed and the door
fault delay expires.
When the control panel is in activation or released
state, the control panel reports a fault if the safety
door is open.
A slow flashing LED indicates a short or open
circuit fault in the safety door wiring connected to
the control panel.
The door fault prevents the panel from entering
activation the activation state (because of life
safety issues) and from activating the actuator (to
ensure property protection).
A steady LED indicates a disablement.
Consult your system installer to determine
whether your system has this option configured.
Yellow Indicates a networking fault. Networking is
optional.
Consult your system installer to determine
whether your system has this option configured.
1X-X3E Series Operation Manual