Aritech 1X-X3E Series Operation Manual page 20

• Disabled fire routing is indicated by a steady General Disable LED and a
steady yellow Fire Routing LED.
• Disabled expansion boards are indicated by a steady General Disable LED
and a steady Expansion I/O Fault/Disabled.
 Disabled actuators are indicated by a steady General Disable LED and a
steady yellow Released LED.
 Disabled safety door monitoring is indicated by a steady General Disable LED
and a steady Door Fault/Disabled LED.
 Disabled extinguishing agent flow monitoring is indicated by a steady General
Disable LED and a steady yellow Extinguishing Agent Flow LED.
 Disabled extinguishing agent pressure monitoring is indicated by a steady
General Disable LED and a steady yellow Low Pressure LED.
 Disabled extinguishing released optical warning panels or signs are indicated
by a steady General Disable LED and a steady yellow Optical Panel On LED.
 Disabled start, hold, or abort extinguishing manual call points are indicated by
a steady General Disable LED and a steady yellow LED for MCP Start, MCP
Hold, or MCP Abort.
• Disabled disable extinguishing switches are indicated by a steady General
Disable LED and a steady yellow LED for Disable extinguishing switch.
There is no audible indication. (For BS 7273 mode, the buzzer is intermittent
when the extinguishing event is disabled.)
Note: Some disablements can prevent or disable the extinguishing event. See
"Extinguishing event prevented" on page 13 for more information.
Tests
• Zone tests are indicated by a steady General Test LED and a steady yellow
Zone LED.
• Extinguishing sounder tests are indicated by a steady General Test LED and
a steady yellow Extinguishing Sounders On LED.
• Fire sounder tests are indicated by a steady General Test LED and a steady
yellow Fire Sounders Delay LED.
• Fire routing tests are indicated by a steady General Test LED and a steady
yellow Fire Routing LED.
 Actuator tests are indicated by a steady General Test LED and a steady
yellow Released LED.
 Extinguishing agent flow monitoring tests are indicated by a steady General
Test LED and a steady yellow Extinguishing Agent Flow LED.
 Extinguishing agent pressure monitoring tests are indicated by a steady
General Test LED and a steady yellow Low Pressure LED.
 Extinguishing released optical warning panel or sign tests are indicated by a
steady General Test LED and a steady yellow Optical Panel On LED.
16 1X-X3E Series Operation Manual