Introduction - Aritech 1X-X3E Series Operation Manual

Introduction

This is the operation manual for the 1X-X3E Series Extinguishing and Fire Alarm
Control Panel. Read these instructions and all related documentation entirely
before operating this product.
The control panel provides three fire detection zones (Z1, Z2, and Z3) and
several manual call point (MCP) inputs that control the extinguishing actions for a
single extinguishing area.
If a fire detection zone is not configured as part of the extinguishing detection
area, the control panel provides standard fire panel functionality for that fire
detection zone. For example, the panel activates fire sounders, fire routing, and
other auxiliary outputs.
Note: Consult your system installer for configuration details about the fire zones
that have been assigned to the fire extinguishing area or (optionally) to fire
detection zones.
Table 1 on page 2 explains the possible fire alarm and extinguishing event states
of the control panel.
1X-X3E Series Operation Manual 1