The projector has "Setting" menu that allows you to set the other various functions described as
follows.
1 Press MENU button on the remote control or
top control to display screen menu. Press
button to select "Setting", then press
the OK button.
2 Press button to select the item you
want to set, press the OK button.
3 Press button to adjust the item, then
press the OK button.
On start
Enable the projector to be turned on
automatically just by connecting the AC
power cord to an outlet when this function
is set to On.
On
Start the projection immediately, enter
countdown display.
Off
Start up in the standby mode.
Standby mode
This function is available when operating the
projector via network.
Press button to select the item below:
ECO. –
Choose "Eco" to save power consumption
Normal–
Choose "Normal" to return to normal standby
Network–
Choose "Network" as network standby mode
LAN
х
ECO
√
Normal
х
Network
*
х: No Control ∆: Power On command Only √: All commands are active
*х: Power On command is active with "Wake On LAN" software.
• The "Wake On LAN" software and its manual can be downloaded from EIKI global website https://global.eiki.com/
File Name : Software_WakeOnLAN
Setting
Remote
RS232C
Keypad
Controler
∆
∆
√
∆
∆
∆
Setting menu
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
On start
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Standby mode
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
∆
∆
∆
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
37