Hdmi Setup - Eiki EK-120 Series Owner's Manual

HDMI setup

When the external equipment is connected to "HDMI" terminal, if the image is not projected
properly, please switch the settings of "Image" or "Sound" in "HDMI setup" menu.
1 Press the MENU button to display the screen
menu. Press  button to select the
"Setting" menu icon. Press the OK to enter
the submenu entry.
2 Press  button to select "HDMI setup"
and then press the OK button.
3 Press  button to select "Image" or
"Sound" to adjust.
4 Press  button to switch the item.
Image
64-940 ....... Select when the HDMI terminal
of an external device (such as a
blu- ray player) is connected to the"
HDMI" terminal.
0-1023 ...... Select when the output of an external
device (such as a computer) is
connected to the "HDMI" terminal via
a conversion cable or similar cable.
Select also when the HDMI terminal
output of a computer or other device is
connected to the "HDMI" terminal.
Note:
The optimal setting varies depending on the output setting of the connected external device. Refer
to the operation instruction of the external device regarding the output of the external device.
Sound
HDMI .......... Select when the HDMI cable is connected, the image and audio are transmitted, and
you do not need to connect the audio signal separately.
VGA ... Select when the terminal output of an external device (such as a computer) is connected to the
"HDMI" terminal via a conversion cable or similar cable.
The sound will not be transmitted, the audio signal is input to "AUDIO IN" terminal.
HDMI EQ setup
Adjust the HDMI input signal level depending on the devices connected to the HDMI port.
Select EQ setup from 1/2/3/4.
Setting
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
41