Eiki EK-120 Series Owner's Manual page 61

Note:
• When insert a USB memory, please ensure the right direction to avoid the damage of the port i.
• Please following the instruction while inserting or removing the USB memory:
a. The indicator beside the USB-A port is flashing while reading the data from USB memory.
Do not remove the USB memory when the indicator is flashing.
b. The indicator beside the USB-A port will not turn on when there is problem to read the
data from the USB memory devce. Please exit the memory viewer function and turn off the
projector, then remove the USB memory device.
c. Do not insert and remove USB memory frequently. Remove the USB memory device at
least 5 seconds after the installation.
Precautions on processing and storage of USB memory device
Please do not place the USB memory or the lid on where the children can reach. Swallow
•
USB memory or the lid may cause choking.
• If smoke or produce abnormal smell, close the external device and contact the dealer.
Do not let the water, chemicals or oil into the USB memory, or it may cause a short circuit or
•
fire.
Do not put foreign matter or metal items in the USB port. Static electricity may cause data
•
loss or data damage.
When USB memory is reading, Do not remove USB memory from the projector, otherwise it
•
may result in data loss or corruption of data.
• Please do not put the USB memory in high temperature, damp or dusty place, or next to
magnetic materials.
 Note:
It allows the insertion or removal of the USB memory when the projector is in any power status.
Using useful functions
61