General Safety Instructions - Simons Voss Technologies Cylinder AX Modularity Manual

Cylinder AX Modularity

1 General safety instructions

Blocked access through manipulation of the product
If you change the product on your own, malfunctions can occur and access through a door can
be blocked.
Modify the product only when needed and only in the manner described in the

documentation.
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

(Manual)
Signal word (ANSI
Z535.6)
DANGER
WARNING
CAUTION
IMPORTANT
NOTE
WARNING
Blocked access
Access through a door may stay blocked due to incorrectly fitted and/or in-
correctly programmed components. SimonsVoss Technologies GmbH is
not liable for the consequences of blocked access such as access to in-
jured or endangered persons, material damage or other damage!
IMPORTANT
Damage resulting from aggressive cleaning agents
The surface of this product may be damaged as a result of the use of un-
suitable cleaning agents.
Only use cleaning agents that are suitable for plastic or metal surfaces.

NOTE
Intended use
SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SimonsVoss products for any other purposes.

Possible immediate effects of non-compliance
Death or serious injury (likely)
Death or serious injury (possible, but unlikely)
Minor injury
Property damage or malfunction
Low or none
1. General safety instructions
3 / 62