Manual Gate Operation - Ghost Controls DEP2 Installation And Owner's Manual

MANUAL GATE OPERATION

EVERY USER MUST KNOW THESE STEPS
The gate can be opened or closed manually by releasing the front mount from the gate.
You must disconnect the operator only after the operator power switch is OFF and the gate is NOT moving. If you have the
accessory ZombieLock installed, this lock should be manually disengaged with the key because removing power does not
®
unlock this lock.
1 .
Move the gate operator control box switch to the off position. The gate operator is battery powered so unplugging the AC
transformer does not turn the power to the operator off.
2 .
Remove the hairpin clip and clevis pin from the FRONT mount of the gate operator.
3 .
Swing the operator out of the way of the gate.
4 .
Swing the gate to the fully open position and temporarily secure it to prevent the gate from freely swinging.
M A N U A L
© G h o s t C o n t r o l s 2 0 1 9
67