Setting The Auto Close Feature - Ghost Controls DEP2 Installation And Owner's Manual

SETTING AUTOCLOSE TIME ON YOUR GATE
The AUTOCLOSE TIME setting determines how long the gate will remain open each time it operates before automatically
closing. The factory default setting is off which requires the user to push either a remote transmitter button, keypad code, or
push-button to close the gate.
NOTE
The AUTOCLOSE time period begins once the gate has reached its open limit.
Minimum AUTOCLOSE Time Period
6 Seconds
A . Press and hold the
B. Release the button and start counting the blinks or watching a clock until the desired AUTOCLOSE time has
been reached. (the led will blink once a second)
C. Press and release the
set from 6 seconds to 60 minutes.
D. The AUTOCLOSE feature is now enabled.
SET AUTOCLOSE TIME
SET AUTOCLOSE TIME
Maximum AUTOCLOSE Time Period
60 Minutes. If longer time is needed, you should enable
PartyMode or Disable AUTOCLOSE.
button until it beeps.
button. The alarm will sound. AUTOCLOSE time can be
P U L L - T O - O P E N
© G h o s t C o n t r o l s 2 0 1 9
41